Fox & Co will boost your bath and shower pressure by adding a booster pump to your system. Most pumps fitted by Fox & Co are of the type that require both hot and cold water supplies, gravity fed by a tank of at least 115 litres (25 gallons) capacity or more. Twin booster pumps are usually installed in the airing cupboard with separate hot and cold water supplies running to the mixer valve position, but can also be installed in bath and shower rooms.  Such pumps can be obtained in several pressures, but the more usual are 1.5 bar to 3 bar.

Fox & Co supply booster pumps with prices ranging from £198.00 for a 1.2 - 1.4bar pump, £248.00 for a 1.8bar, rising to £380.00 + for the 3.0bar unit.  Please call for prices and fitting charges on more powerful booster pumps. Labour prices range from £175.00 for a replacement of a pump to around £295.00 for a brand new installation. Prices may vary dependent on job requirements. All pumps come with a minimum of 1 years parts and labour guarantee or as stated by manufacturers.

Single booster pumps are installed after the mixer valve with blended hot and cold water running to the pump and then onto the handset position.

Please Note:
Shower/booster pumps must not be connected directly to the mains water system.
If you wish to boost your incoming mains water pressure you will need to install the Grundfos Homebooster Package unit.
Link: http://www.heatandplumb.com/acatalog/Grundfos_Homebooster_Package_Unit.htmlt

HOW DO THEY WORK?
 A typical twin booster pump installation.